Gear motors
Spur, planetary and worm gear motors from 20 to 42 mm, with reduction ratios from about 1:3.5 to 1:1656.
- Models
- 10
- Rated voltage
- 2.4–24 V
- Speed at max. eff.
- 2–308 rpm
- Torque at max. eff.
- 30–1268 mN·m
DC motors, gear motors and brushless motors, matched to your load.
HSE MOTOR is the brand of Changzhou Hswiss Motor Technology. Since 2013 we have designed and built motors in Changzhou for makers of appliances, medical devices, automotive parts and power tools. Tell us the speed and torque you need at your voltage. We propose a motor, then make samples for you to test.
- Load
- 21%of stall torque
- Speed
- 79%of no-load speed
- Current
- 27%of stall current
- Efficiency
- 63%of input power
- ISO 9001:2015 certified
- Quality management certificate HCRZ/Q20240300 covers the design and manufacture of micro motors.
- 41 catalogue models
- Gear motors, brushless motors and brushed DC motors, each with tested curves and drawings.
- Founded in 2013
- Selling to Europe, the Americas, Japan, Korea, Hong Kong, Taiwan and mainland China.
Product range
Three families, 41 models and 70 tested versions. Use the motor finder to filter by voltage, speed and torque.
Brushless DC motors
Inner-rotor BLDC motors from 24 to 90 mm, a matching driver, and outer-rotor generators.
- Models
- 11
- Rated voltage
- 12–48 V
- Speed at max. eff.
- 2050–11056 rpm
- Torque at max. eff.
- 2.6–86.7 mN·m
Brushed DC motors
Carbon-brush and metal-brush DC motors in standard frames from 370 to 775, plus large 42 to 80 mm motors.
- Models
- 20
- Rated voltage
- 3–170 V
- Speed at max. eff.
- 2080–17086 rpm
- Torque at max. eff.
- 1.38–457.7 mN·m
Built around your product
Every catalogue model is a starting point. We change the winding for your voltage and speed, the gearbox length and ratio for your output, and the shaft, leads and connector for your assembly line.
Our factory in Changzhou
Engineering, sample making, quality control and assembly sit under one roof in the Wujin Economic Development Zone, so the people who design your motor are a few metres from the line that builds it.
- 2013
- Founded in Wujin, Changzhou
- ISO 9001:2015
- Certified quality system
- In-house
- Engineering and sample workshop
- Automated
- Assembly lines for volume orders
Assembly hall 
Automated assembly 
Wiring and final assembly 
Automated assembly line
From drawing to shipment
Send your requirements
Voltage, speed and torque at your load, size limits and yearly quantity. Add a drawing if you have one.
Engineering review
Our engineering department proposes a motor, winding and gearbox, and sends a quotation.
Samples
Our sample workshop builds samples for you to test in your product.
Approval
You confirm the sample and the specification we will build to.
Production and shipment
Production runs to the approved specification, with inspection before packing.
Quality system
Our quality management system is certified to ISO 9001:2015. See our factory and quality controls.
Full-size copy sent on request.
| Standard | GB/T 19001-2016 / ISO 9001:2015 |
|---|---|
| Certificate number | HCRZ/Q20240300 |
| Scope | Design and manufacture of micro motors (3C mandatory products excluded) |
| Certification body | Jiangsu Hengchuang Testing and Certification Co., Ltd. |
| IAF code | 19.09.01 |
| Issued | 18 August 2026 |
| Recertification due | 17 May 2027 |
Send us your operating point
Voltage, speed, torque and yearly quantity are enough for a first quote. Drawings help but are not required.